Schweisskraft CO2 svejser EASY-MIG 201i Multi (Mig-Tig-MMA)
search
  • Schweisskraft CO2 svejser EASY-MIG 201i Multi (Mig-Tig-MMA)

Schweisskraft CO2 svejser EASY-MIG 201i Multi (Mig-Tig-MMA)

10.000,00 kr
Inkl. moms

Schweisskraft EASY-MIG 201i Multi CO2 svejser Inkl. 3M slange og manometer.

Inverter baseret med mulighed for at tilslutte Tig eller MMA håndtag (For Tig og MMA (pindsvejser) skal der tilkøbes slange/håndtag)

En prisstærk svejser i god kvalitet.

Med standard ZA tilslutning af slange (kan bruge vores slanger fra eks. Migatronic og Binzel mv. samt forbrugsdele)

Schweisskraft er en prisstærk svejser som vi bestemt kan stå inde for rent kvalitetsmæssigt.

Medfølger:

SMB 15 Svejseslange 3m

Stelkabel 3m 16mm2

MANUAL EASY-MIG 201I-MULTI Dansk

MANUAL EASY-MIG 201I-MULTI Engelsk

Antal

BASIC FEATURES
Method
  • MAG
  • MIG
Sheet thicknesses
  • From 0.8 mm for steel and stainless steel (MAG)
  • From 2 mm for aluminium (MIG)
Base materials
  • Structural steels
  • Unalloyed and low-alloyed materials
  • CrNi steels ferritic/austenitic
  • Aluminium alloys
Typical applications
  • Locksmithery, mechanical engineering
  • agriculture, car workshop
  • Maintenance, repair
TECHNICAL DATA
Dimensions and weights
Length (product) approx.
525mm
Width/depth (product) approx.
260mm
Height (product) approx.
340mm
Net weight approx.
16kg
Setting range
Setting range MIG/MAG
20 – 200A
Setting range TIG DC
10 - 200A
Setting range electrode
20 - 180A
Duty cycle
Duty cycle at Imax. 40°C
35%
Current at 100% DC 40°C
110A
Electrical Data
Supply voltage
230V
Mains frequency
50Hz
Wire feed
weldable wires steel
0.6 – 0.8mm
weldable wires stainless steel
0.6 – 0.8mm
weldable wires aluminium
1,0mm
weldable wires flux core wire
0.9mm
Wire feet unit
2Rollers
Wire feed speed
1,0 – 14m/min
Wire feed rolls/driven
1Roll
Power consumption
Power factor
0,96cos phi
Electrical connections
Required generator output
12kVA
Positive mains voltage tolerance
10%
Open circuit voltage
33V
OSDO
2274-1089020

Specifikke referencer

-